language
Blog
Please find an overview of our press events.
2025-05-19
The 2025 Shanghai Pujiang International Intellectual Property Forum Concludes Successfully, with Jiangyin Binjiang Medical Equipment Co., Ltd.
The 2025 Shanghai Pujiang International Intellectual Property Forum Concludes Successfully, with Jiangyin Binjiang Medical Equipment Co., Ltd.
2021-06-09
Solemn Statement
Recently, Jiangyin Binjiang Medical Equipment Co., Ltd. (hereinafter referred to as “our company”) discovered that information about our products and promotional materials are being posted on Taobao and various other online platforms. We hereby solemnly declare that, apart from our official website, our company has never registered any merchant accounts on any other online platforms, nor has it ever published product information or promotional materials on such platforms.
2020-10-08
Instructions for Using an Autoclave
During routine cleaning, first soak and scrub items in a detergent solution to remove grease, blood stains, and other contaminants, then rinse thoroughly with running water. Instruments and other items with joints, gear slots, crevices, or other hard-to-reach areas should be opened as much as possible or disassembled for thorough brushing and washing. After washing, all items should be dried and sorted and packaged according to the specific needs of each clinical department to prevent recontamination. Containers and transport equipment used for contaminated and uncontaminated items must be strictly separated and clearly labeled to avoid cross-contamination.
2020-09-24
Precautions to Observe During Use of a Steam Generator
Once the required time has elapsed, be sure to disconnect the power supply or shut off the gas valve to allow the temperature inside the autoclave to drop naturally. Only when the pressure indicated by the gauge has fallen to zero should you open the exhaust valve, loosen the bolts, lift the lid, and carefully remove the items. Of course, if you notice that the pressure gauge has not yet dropped to zero, you must not open the exhaust valve under any circumstances. Opening the valve would cause a sudden drop in pressure inside the chamber, leading to an imbalance between the internal and external pressures. This could force the culture medium out of the flask through the opening, contaminating the cotton plug and resulting in contamination of the medium. In such a case, the entire procedure would be considered a failure.
2020-09-11
Instructions for Using an Autoclave
All instruments, linens, clothing, and other items that have come into contact with infectious patients must first be treated with chemical disinfectants, followed by routine washing. Special attention should be paid to all items used in isolation wards: they must undergo rigorous decontamination before being washed. During routine washing, the items should first be soaked and scrubbed in a detergent solution to remove grease, blood stains, and other contaminants, then thoroughly rinsed under running water. Instruments and other objects with joints, gear teeth, crevices, or other hard-to-reach areas should be opened as much as possible or disassembled for thorough brushing and cleaning. After washing, all items should be dried thoroughly and then sorted and packaged according to their specific clinical requirements to prevent recontamination. Containers and transport equipment used for contaminated items must be strictly separated from those used for clean items and clearly labeled to prevent cross-contamination.
2019-10-08
Causes of Fouling in Heat Exchangers and Corresponding Treatment Methods
With the exception of seawater cooling systems, “biofouling” generally refers to fouling in general. It can give rise to slime, which in turn creates favorable conditions for the proliferation of biofouling organisms. This type of fouling is highly sensitive to temperature; under suitable thermal conditions, biofouling can develop into a substantial fouling layer.
2019-09-17
During the commissioning process of the condenser
A condenser can be regarded as a type of heat exchanger; since its operating process involves heat release, the temperature of the condenser is generally quite high. During operation, the condenser first allows the gas to pass through an exceptionally long tube, thereby dissipating heat into the surrounding air. Because metals such as copper have excellent thermal conductivity, they are often used for steam conveyance.
Tel：+86-510-86270699 +86-510-86296768
Add：No 38, Yungu Road, Changshou Community, Zhouzhuang Town, Jiangyin City, Jiangsu Province
Copyright Jiangyin Binjiang Medical Equipment Co., Ltd. All Rights Reserved.